< All Topics
Print

Biogas from POME: Potential, Process, and Renewable Energy Benefits

Key Takeaways: Biogas from POME
  • POME contains a high level of organic matter and has the potential to produce biogas through anaerobic digestion.
  • Capturing methane reduces greenhouse gas emissions while also generating electricity and heat for the mill.
  • Performance depends heavily on reactor design, substrate ratio, and plant management.

Palm oil mill effluent (POME) has long been regarded as a treatment burden. Yet this waste contains organic matter that can be converted into biogas through anaerobic digestion. Capturing methane from POME not only reduces greenhouse gas emissions but also generates renewable energy that can be used within the mill. This article summarizes the scientific evidence, potential figures, technical processes, and the limitations of applying it in Indonesia.

What is POME and why can it produce biogas?

POME is the liquid waste generated from processing fresh fruit bunches (TBS) into palm oil. It comes mainly from fruit washing water, sterilization, and oil separation, and is characterized by a cloudy brown color, high temperature, and a very large organic load.[1][2]

It is this organic content that serves as the substrate for methane-producing microbes. Under oxygen-free conditions, microbes break down organic compounds through four stages—hydrolysis, acidogenesis, acetogenesis, and methanogenesis—producing biogas that typically contains 50–75% methane (CH₄) and 25–45% carbon dioxide (CO₂).[9][10]

General characteristics of POME and their link to biogas formation
Aspect General description Implication
Source Sterilizer water, fruit washing, and oil separation Large and continuous volume while the mill is operating
Organic content High COD and BOD Abundant substrate for methanogenic microbes
Temperature Waste leaves the process warm Supports the anaerobic process, though temperature control is needed
Emissions Methane escapes from open ponds Both an emission risk and a wasted energy potential
Content figures depend heavily on mill practices, so design values should be taken from field measurements rather than generic figures.

How much biogas can be produced?

Various studies report different potential ranges due to differences in methods and substrates. A review of 38 studies in Indonesia found methane yields of around 15–28 m³ per m³ of POME in optimized anaerobic processes. Meanwhile, another study reported a range of 25.6 m³ of biogas per m³ of POME, with a methane content of 50–75%.[8][10]

At the national level, BRIN estimates the potential of wastewater from TBS processing at 229.9 million m³ per year, with a theoretical electricity capacity of up to 3.9 GW. Another calculation, based on 125 million tonnes of POME per year, gives around 28.8 m³ of biogas per tonne of POME, or a total of 3.6 billion m³ of biogas per year.[5][8]

Examples of potential figures from various sources — units and calculation bases differ
Source Figure Note
Review of 38 studies (Indonesia) 15–28 m³ CH₄ per m³ of POME Optimized anaerobic process
SciTech Asia ±25.6 m³ biogas per m³ of POME Methane 50–75%
BRIN / ANTARA 229.9 million m³ of POME per year Electricity potential up to 3.9 GW
Kontan 28.8 m³ biogas per tonne of POME Total ±3.6 billion m³ per year
These figures are not interchangeable: some are calculated per volume, some per tonne, and some represent the national theoretical potential.

How does the technical process of methane capture work?

In simple terms, POME is fed into a closed anaerobic reactor where microbes break down the organic matter. The biogas formed is collected, cleaned of sulfides and water vapor, then burned to produce heat or electricity. The liquid residue can still be treated further or used as liquid fertilizer if it meets the required standards.[1][3]

A range of reactor designs is used in the field, from covered lagoons to Continuous Stirred Tank Reactors (CSTR). The PTBg Sei Pagar facility, developed by BRIN and PTPN IV, uses CSTR technology to capture methane from POME and use it as a supplementary fuel in production.[6]

What are the energy and climate benefits?

The main benefit is replacing fossil fuels within the mill. Studies at a number of Indonesian mills estimate that methane capture systems can generate around 25.4–40.7 kWh per tonne of TBS and reduce emissions by around 109–175 kg CO₂e per tonne of TBS. A mill with a capacity of 45 tonnes of TBS per hour could generate around 0.95–1.52 MW of electricity.[3]

Another study shows that the energy from converting POME into methane, burned in a combined heat and power facility, can exceed the energy required by the palm oil processing operation. In other words, waste treatment can shift from a cost center to an energy source.[4]

Two main benefits of capturing methane from POME
Dimension Benefit Evidence
Energy Electricity and heat for mill needs 25.4–40.7 kWh/tonne of TBS; 0.95–1.52 MW for a 45-tonne-of-TBS/hour mill [3]
Climate Methane emissions avoided ±109–175 kg CO₂e/tonne of TBS [3]
Methane has a much stronger global warming potential than CO₂, so capturing it delivers a large climate effect even though its volume is smaller.

What innovations are being developed?

One focus of research is improving methane yield with additional materials. A collaboration between Kyoto University and PTPN IV Regional III in Riau tested the use of carbon felt in a laboratory reactor over five months. The result was methane production around 22% higher than in the control reactor, with a projected additional energy output equivalent to 290 kW if applied at a medium-sized mill.[7]

Another approach is substrate mixing (co-digestion). Adding empty fruit bunches or decanter cake can increase biogas production, although the figures depend heavily on the mixing ratio and reactor conditions.[9][10]

What are the challenges to its implementation in Indonesia?

The main challenge is not the availability of raw material, but gaps in technology, infrastructure, and financing. Still-fragmented policies and weak market channels lead many mills to opt for conventional POME treatment, despite its large energy potential.[5]

In addition, laboratory-scale research findings cannot automatically be replicated in a mill. The projected additional power from the use of carbon felt, for example, still comes from laboratory trials and needs field validation before it can serve as a basis for investment.[7]

How can the feasibility of a POME biogas project be assessed?

The assessment should start with field data: POME volume per hour, COD content, temperature, and the mill’s operating patterns. These data determine the reactor size, retention time, and estimated gas production. Next, calculate the mill’s energy needs to see how much of the existing fuel biogas can replace.[1][3]

Economic aspects cannot be separated from operational ones. Investment cost, maintenance, technician availability, and gas quality are as important as the theoretical potential figures. A systematic review in Indonesia emphasizes the need for mill-specific techno-economic analysis.[5]

Summary of initial assessment steps
Step Data required Resulting decision
Measure the substrate POME volume, COD, temperature Reactor size and gas estimate
Map energy needs Mill fuel and electricity consumption Proportion of energy that can be replaced
Calculate emissions Methane no longer released Emission reductions and carbon credit potential
Test feasibility Investment and operating costs Investment decision
This table is a thinking framework, not a technical design formula. Final calculations require technical consultation and field data.

Is POME biogas the same as bio-CNG?

No. Biogas from anaerobic digestion still contains CO₂ and other impurities. When the gas is cleaned and upgraded to meet natural gas specifications, the product is called bio-compressed natural gas (bio-CNG) and can be used as a vehicle fuel.[10]

BRIN and its partners are also developing the processing of POME into Bio-Compressed Methane Gas (BioCMG). The main difference lies in the upgrading stage and the final quality standard, not in the substrate source.[6]

Are the environmental risks already addressed?

Methane capture reduces emissions in real terms, but the treatment residue still needs to be managed. POME that has passed through the reactor generally still requires further treatment to meet wastewater quality standards before being discharged or used as liquid fertilizer.[2][3]

Thus, biogas is not a standalone solution but part of an integrated waste management system. Combining it with composting of empty fruit bunches, as proposed by several studies, can add value while also reducing the environmental burden.[3]

What is the conclusion?

POME is a resource that has long been misjudged as mere waste. Through anaerobic digestion, this waste can produce biogas with a high methane content, reduce emissions, and supply energy to the mill at the same time. Its national potential is large, but utilization is still constrained by technology, financing, and inconsistent field data.[5][8]

The way forward is to turn research results into reliable installations that can be evaluated economically on a per-mill basis. For readers who wish to explore further, the related article on POME and TBS processing provides process context that complements this discussion.

References

  1. Chynoweth, D. P., et al. (2004). Anaerobic digestion of palm oil mill effluent. DOI: 10.1016/j.biortech.2003.11.016.
  2. Yacob, S., Hassan, M. A., Shirai, Y., Wakisaka, M., & Subash, S. (2006). Baseline study of methane emission from anaerobic ponds of palm oil mill effluent treatment. Science of the Total Environment, 366(1), 187–196. DOI: 10.1016/j.scitotenv.2005.08.017.
  3. Hassan, M. A., Yacob, S., Shirai, Y., Wakisaka, M., & Zhang, S. (2011). Treatment of palm oil mill effluent (POME) using anaerobic digestion and its potential for renewable energy. Journal of Cleaner Production. Research summary: PubMed 26398023.
  4. Poh, P. E., et al. (2014). Anaerobic treatment of palm oil mill effluents: potential contribution to net energy yield and reduction of greenhouse gas emissions from biodiesel production. Journal of Cleaner Production. S0959652613005179.
  5. Badan Riset dan Inovasi Nasional (BRIN). (2023). Development of biogas from palm oil mill effluent (POME). Research summary.
  6. Antara News. (2024). BRIN and PTPN IV develop biogas from palm oil waste in Sei Pagar. riau.antaranews.com.
  7. Antara News. (2024). Riset Kyoto University di PTPN IV Regional III berhasil optimalisasi produksi biogas hingga 22 persen. riau.antaranews.com.
  8. Kontan. (2024). Indonesia’s palm oil waste biogas potential reaches 3.6 billion m³ per year. industri.kontan.co.id.
  9. Jurnal Teknologi & Industri Pangan (Unila). Biogas production from palm oil mill effluent and the prospect of co-digestion. PDF.
  10. SciTech Asia. Potential utilization of POME into biogas and bio-CNG. PDF.
Table of Contents